| 1 |
NSC 16 |
MS ISO 21988:2007 |
Abrasion-resistant cast irons - Classification (ISO 21988:2006, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 2 |
NSC 16 |
MS ISO 3852:2010 |
Iron ores for blast furnace and direct reduction feedstocks - Determination of bulk density (First revision) (ISO 3852:2007, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 3 |
NSC 16 |
MS ISO 7900:2011 |
Steel wire and wire products for fences - Zinc and zinc-alloy-coated steel barbed wire (ISO 7900:2006, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 4 |
NSC 16 |
MS ISO 11534:2011 |
Iron ores - Determination of tin content - Flame atomic absorption spectrometric method (First revision) (ISO 11534:2006, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 5 |
NSC 16 |
MS ISO 4691:2011 |
Iron ores - Determination of Titanium content - Diantipyrylmethane spectrophotometric method (First revision) (ISO 4691:2009, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 6 |
NSC 16 |
MS ISO 5001:2014 |
Cold-reduced carbon steel sheet for vitreous enamelling (ISO 5001:2012, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 7 |
NSC 16 |
MS ISO 9513:2015 |
Metallic materials - Calibration of extensometer systems used in uniaxial testing (First revision) (ISO 9513:2012, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 8 |
NSC 16 |
MS ISO 6506-4:2017 |
Metallic materials - Brinell hardness test - Part 4: Table of hardness values (First revision) (ISO 6506-4:2014, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 9 |
NSC 16 |
MS ISO 16120-3:2017 |
Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low carbon steel wire rod (Second revision) (ISO 16120-3:2011,IDT) (Confirmed 2025) |
21-Februari-2025 |
| 10 |
NSC 16 |
MS ISO 7500-1:2018 |
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (First revision) (ISO 7500-1:2018, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 11 |
NSC 16 |
MS ISO 6929:2018 |
Steel products - Vocabulary (First revision) (ISO 6929:2013, IDT) (Confirmed 2025) |
21-Februari-2025 |
| 12 |
NSC 19 |
MS IEC 60335-2-88:2002 (Confirmed:2013) |
Safety household and similar electrical appliances Part 2: Particular requirements for humidifiers intended for use with heating ventilation or air-conditioning systems |
28-Februari-2025 |
| 13 |
NSC 19 |
MS IEC 60721-3-5:2005 |
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicles installations (IEC 60721-3-5:1997, IDT) |
28-Februari-2025 |
| 14 |
NSC 19 |
MS IEC 60068-2-30:2008 (Confirmed:2015) |
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 H + 12 H Cycle) (IEC 60068-2-30:2005, IDT) |
28-Februari-2025 |
| 15 |
NSC 19 |
MS IEC 60068-2-66:2008 (Confirmed:2015) |
Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (Unsaturated pressurized vapour) (IEC 60068-2-66:1994, IDT) |
28-Februari-2025 |
| 16 |
NSC 19 |
MS IEC 60068-2-47:2009 |
Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005, IDT) |
28-Februari-2025 |
| 17 |
NSC 19 |
MS 62476:2011 (Confirmed:2015) |
Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products |
28-Februari-2025 |
| 18 |
NSC 19 |
MS IEC 60929:2008 |
A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements (First revision) (IEC 60929:2006, IDT) |
11-Mac-2025 |
| 19 |
NSC 19 |
MS IEC 62031:2011 |
Led modules for general lighting - Safety specifications (IEC 62031:2008, IDT) |
11-Mac-2025 |
| 20 |
NSC 19 |
MS IEC 62560:2012 |
Self-ballasted led-lamps for general lighting services by voltage > 50 V - Safety specifications (IEC 62560:2011, IDT) |
11-Mac-2025 |
| 21 |
NSC 01 |
MS 2679:2017 (BM) |
Amalan pertanian baik (APB) - Pemeliharaan lebah (Tribus Apini) dan Kelulut (Tribus Meliponini) (Confirmed 2025) |
11-April-2025 |
| 22 |
NSC 22 |
MS 2629:2018 |
Palm Plywood - Specification |
18-April-2025 |
| 23 |
NSC 09 |
MS 2634:2019 |
Halal cosmetics - General requirements |
21-April-2025 |
| 24 |
NSC 09 |
MS 2634:2019 (BM) |
Kosmetik halal - Keperluan umum |
21-April-2025 |
| 25 |
NSC 19 |
MS IEC 60335-2-74:2010 |
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters (Second revision) (IEC 60335-2-74:2006, IDT) |
01-Mei-2025 |
| 26 |
NSC 19 |
MS IEC 60335-2-85:2014 |
Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers (First revision) (IEC 60335-2-85:2008, IDT) |
01-Mei-2025 |
| 27 |
NSC 19 |
MS IEC 60335-2-73:2014 |
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters (Second revision) (IEC 60335-2-73: 2009, IDT) |
01-Mei-2025 |
| 28 |
NSC 19 |
MS IEC 60335-2-23:2017 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care (Third revision) (IEC 60335-2-23:2012, IDT) |
01-Mei-2025 |
| 29 |
NSC 19 |
MS IEC 60335-2-27:2017 |
Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation (First revision) (IEC 60335-2-27:2012, IDT) |
01-Mei-2025 |
| 30 |
NSC 19 |
MS IEC 60335-2-45:2003 |
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances (First revision) (IEC 60335-2-45:2002, IDT) |
01-Mei-2025 |
| 31 |
NSC 14 |
MS 2640:2020 |
Rubber, vulcanised rubber - Determination of free sulphur content |
13-Mei-2025 |
| 32 |
NSC 14 |
MS ISO 18899:2016 |
Rubber - Guide to the calibration of test equipment (ISO18899:2013, IDT) |
13-Mei-2025 |
| 33 |
NSC 14 |
MS ISO 247-2:2020 |
Rubber - Determination of ash - Part 2: Thermogravimetric analysis (TGA) (ISO 247-2:2018, IDT) |
13-Mei-2025 |
| 34 |
NSC 14 |
MS ISO 4662:2019 |
Rubber, vulcanized or thermoplastic - Determination of rebound resilience (Second revision) (ISO 4662:2017, IDT) |
13-Mei-2025 |
| 35 |
NSC 14 |
MS ISO 4666-1:2012 (Confirmed:2020) |
Rubber, vulcanized - Determination of temperature rise and resistance to fatigue In flexometer testing - Part 1: Basic principles (ISO 4666-1:2010, IDT) |
13-Mei-2025 |
| 36 |
NSC 02 |
MS 1103:1988 |
Method of determination of water using Karl Fischer Reagent (Confirmed 2025) |
01-Jun-2025 |
| 37 |
NSC 02 |
MS 1116:2001 |
Specification for sodium chloride for industrial use (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 38 |
NSC 02 |
MS 165:2014 |
Industrial acids - Sampling and test methods (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 39 |
NSC 02 |
MS 174:2014 |
Formic acid - Technical grade - Specification (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 40 |
NSC 02 |
MS 175:1973 |
Specification for glacial acetic acid (Confirmed 2025) |
01-Jun-2025 |
| 41 |
NSC 02 |
MS 176:1973 |
Specification for nitric acid (Technical grade) (Confirmed 2025) |
01-Jun-2025 |
| 42 |
NSC 02 |
MS 1850-14:2009 |
Water quality - Sampling - Part 14: Guidance on quality assurance of environmental water sampling and handling (ISO 5667-14: 1998, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 43 |
NSC 02 |
MS 1850:Part 10:2006 |
Water quality - Sampling - Part 10: Guidance on sampling of waste waters (ISO 5667 - Part 10:1992, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 44 |
NSC 02 |
MS 1850:Part 11:2006 |
Water quality - Sampling - Part 11: Guidance on sampling of groundwaters (ISO 5667:Part 11:1993, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 45 |
NSC 02 |
MS 1850:Part 15:2006 |
Water quality - Sampling - Part 15: Guidance on preservation and handling of sludge and sediment samples (ISO 5667- Part 15:1999, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 46 |
NSC 02 |
MS 1850:Part 4:2005 |
Water quality - Sampling - Part 4: Guidance on sampling from lakes, natural and man-made (ISO 5667 - Part 4:1987, MOD) (Confirmed 2025) |
01-Jun-2025 |
| 47 |
NSC 02 |
MS 1850:Part 6:2006 |
Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667 - Part 6:1990, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 48 |
NSC 02 |
MS 1850:Part 9:2006 |
Water quality - Sampling - Part 9: Guidance on sampling from marine waters (ISO 5667 - Part 9:1992, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 49 |
NSC 02 |
MS 1869:2017 |
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999, MOD) (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 50 |
NSC 02 |
MS 1888:2007 |
Water quality - Detection and enumeration of coliform organisms, thermotolerant coliform organisms and presumptive Escherichia Coli - Multiple tube (Most probable number) method (ISO 9308-2:1990, MOD) (Confirmed 2025) |
01-Jun-2025 |
| 51 |
NSC 02 |
MS 1993:2007 |
Water quality - Determination of iron - Spectrometric method using 1,10-Phenanthroline (ISO 6332:1988, MOD) (Confirmed 2025) |
01-Jun-2025 |
| 52 |
NSC 02 |
MS 2037:2019 |
Water quality - Determination of total suspended solids by filtration through glass-fibre filters (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 53 |
NSC 02 |
MS 2263:2009 |
Water quality - Determination of ammoniacal nitrogen - Distillation and titration method (ISO 5664:1984, MOD) (Confirmed 2025) |
01-Jun-2025 |
| 54 |
NSC 02 |
MS 2457:2012 |
Soil quality - Chemical analysis - Determination of PH (Water or KCL) (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 55 |
NSC 02 |
MS 2458:2012 |
Soil quality - Chemical analysis - Determination of specific electrical conductivity (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 56 |
NSC 02 |
MS 431:1976 |
Specification for methanol (Technical grade) (Confirmed 2025) |
01-Jun-2025 |
| 57 |
NSC 02 |
MS 506:1977 |
Specification for ammonia (Anhydrous and aqueous) (Confirmed 2025) |
01-Jun-2025 |
| 58 |
NSC 02 |
MS 508:1977 |
Specification for sodium chlorate (Technical grade) (Confirmed 2025) |
01-Jun-2025 |
| 59 |
NSC 02 |
MS 511:2008 |
Zinc oxide for use in rubber - Specification (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 60 |
NSC 02 |
MS 645:2010 |
Ethanol for industrial use - Specification (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 61 |
NSC 02 |
MS 646:1980 |
Specification for industrial methylated spirits (Confirmed 2025) |
01-Jun-2025 |
| 62 |
NSC 02 |
MS 752:1981 |
Specification for sodium silicates (Confirmed 2025) |
01-Jun-2025 |
| 63 |
NSC 02 |
MS 820:1983 |
Specification for sodium metabisulphite, technical grade (Confirmed 2025) |
01-Jun-2025 |
| 64 |
NSC 02 |
MS 879: 1984 |
Specification for sodium sulphite, technical grade (Confirmed 2025) |
01-Jun-2025 |
| 65 |
NSC 02 |
MS 994:1990 |
Specification for water for lead-acid batteries (Confirmed 2025) |
01-Jun-2025 |
| 66 |
NSC 02 |
MS ISO 10694:2016 |
Soil quality - Determination of organic and total carbon after dry combustion (Elementary analysis) (ISO 10694:1995, MOD) (Confirmed 2025) |
01-Jun-2025 |
| 67 |
NSC 02 |
MS ISO 10703:2010 |
Water quality - Determination of the activity concentration of radionuclides - Method by high resolution Gamma-ray spectrometry (First revision) (ISO 10703:2007, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 68 |
NSC 02 |
MS ISO 1388-12:2010 |
Ethanol for industrial use - Methods of test - Part 12 : Determination of permanganate time (ISO 1388-12:1981, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 69 |
NSC 02 |
MS ISO 1388-1:2010 |
Ethanol for industrial use - Methods of test - Part 1 : General (ISO 1388-1:1981, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 70 |
NSC 02 |
MS ISO 1388-2:2010 |
Ethanol for industrial use - Methods of test - Part 2 : Detection of alkalinity or determination of acidity to phenolphthalein (ISO 1388-2:1981, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 71 |
NSC 02 |
MS ISO 1388-4:2010 |
Ethanol for industrial use - Methods of test - Part 4 : Estimation of content of carbonyl compounds present in moderate amounts - Titrimetric method (ISO 1388-4:1981, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 72 |
NSC 02 |
MS ISO 1388-6:2010 |
Ethanol for industrial use - Methods of test - Part 6 : Test for miscibility with water (ISO 1388-6:1981, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 73 |
NSC 02 |
MS ISO 1388-7:2010 |
Ethanol for industrial use - Methods of test - Part 7 : Determination of methanol content [Methanol contents between 0.01 and 0.20 % (V/V)] - Photometric method (ISO 1388- 7:1981, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 74 |
NSC 02 |
MS ISO 15923-1:2017 |
Water quality - Determination of selected parameter by discrete analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection (ISO 15923-1:2014, MOD) (Confirmed 2025) |
01-Jun-2025 |
| 75 |
NSC 02 |
MS ISO 3696:2007 |
Water for analytical laboratory use - Specification and test methods (ISO 3696:1987, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 76 |
NSC 02 |
MS ISO 5667-12:2018 |
Water quality - Sampling - Part 12: Guidance on sampling of bottom sediments (ISO 5667-12:2017,IDT) (Confirmed 2025) |
01-Jun-2025 |
| 77 |
NSC 02 |
MS ISO 5667-19:2017 |
Water quality - Sampling - Part 19: Guidance on sampling of marine sediments (ISO 5667-19:2004,IDT) (Confirmed 2025) |
01-Jun-2025 |
| 78 |
NSC 02 |
MS ISO 5667-1:2016 |
Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2006, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 79 |
NSC 02 |
MS ISO 5667-20:2016 |
Water quality - Sampling - Part 20: Guidance on the use of sampling data for decision making - Compliance with thresholds and classification systems (ISO 5667-20:2008, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 80 |
NSC 02 |
MS ISO 5667-21:2017 |
Water quality - Sampling - Part 21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes (ISO 5667-21:2010, MOD) (Confirmed 2025) |
01-Jun-2025 |
| 81 |
NSC 02 |
MS ISO 5667-3:2016 |
Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667 - Part 3:2012, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 82 |
NSC 02 |
MS ISO 5667-5:2012 |
Water quality - Sampling - Part 5: Guidance on sampling of drinking water from treatment works and piped distribution system (ISO 5667-5:2006, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 83 |
NSC 02 |
MS ISO 5667-8:2017 |
Water quality - Sampling - Part 8: Guidance on the sampling of wet deposition (ISO 5667-8:1993, MOD) (Confirmed 2025) |
01-Jun-2025 |
| 84 |
NSC 02 |
MS ISO 5667:Part 16:2007 |
Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:1998, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 85 |
NSC 02 |
MS ISO 5667:Part 17:2007 |
Water quality - Sampling - Part 17: Guidance on sampling of suspended sediments (ISO 5667-17:2000, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 86 |
NSC 02 |
MS ISO 5814: 2016 |
Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 87 |
NSC 02 |
MS ISO 6206:2003 |
Chemical products for industrial use - Sampling - Vocabulary (ISO 6206:1979, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 88 |
NSC 02 |
MS ISO 6353-1:2003 |
Reagents for chemical analysis - Part 1: General test methods (ISO 6353: Part 1:1982, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 89 |
NSC 02 |
MS ISO 6353-2:2003 |
Reagents for chemical analysis - Part 2 : Specifications - First series (ISO 6353:Part 2:1983, Add.2:1986, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 90 |
NSC 02 |
MS ISO 7888:2005 |
Water quality - Determination of electrical conductivity (ISO 7888:1985, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 91 |
NSC 02 |
MS ISO 9308-1:2018 |
Water quality - Enumeration of Escherichia coli and Coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO 9308-1:2014, MOD) (First revision) (Confirmed 2025) |
01-Jun-2025 |
| 92 |
NSC 02 |
MS ISO 9696:2010 |
Water quality - Measurement of gross alpha activity in non-saline water - Thick source method (First revision) (ISO 9696:2007, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 93 |
NSC 02 |
MS ISO 9697:2017 |
Water quality - Gross beta activity in non-saline water - Test method using thick source (First revision) (ISO 9697:2015, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 94 |
NSC 02 |
MS ISO 9698:2016 |
Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010, IDT) (Confirmed 2025) |
01-Jun-2025 |
| 95 |
NSC 14 |
MS 1872:2005 |
Flexible cellular polymeric materials - Determination of compression set under humid conditions (ISO 13362:2000, MOD) (Confirmed:2025) |
04-Jun-2025 |
| 96 |
NSC 14 |
MS 679:2011 |
Latex foam rubber mattresses for domestic and general use - Specification (Second revision) (Confirmed:2025) |
04-Jun-2025 |
| 97 |
NSC 14 |
MS 972:1998 |
Specification for solid rubber flooring (First revision) (Confirmed:2025) |
04-Jun-2025 |
| 98 |
NSC 17 |
MS 2244:2009 |
Test method for moisture in cotton by oven drying (Confirmed:2025) |
12-Jun-2025 |
| 99 |
NSC 19 |
MS IEC 62087-1:2017 |
Audio, video and related equipment - Determination of power consumption - Part 1: General (First revision) (IEC 62087-1:2015, IDT) |
28-Jun-2025 |
| 100 |
NSC 19 |
MS IEC 62087-2:2017 |
Audio, video and related equipment - Determination of power consumption - Part 2: Signals and media (First revision) (IEC 62087-2:2015, IDT) |
28-Jun-2025 |
| 101 |
NSC 19 |
MS IEC 62087-3:2017 |
Audio, video and related equipment - Determination of power consumption - Part 3: Television sets (First revision) (IEC 62087-3:2015, IDT) |
28-Jun-2025 |
| 102 |
NSC 22 |
MS 1401:2018 |
Dressed timber, door jambs and general mouldings - Specification (First revision) (Confirmed: 2025) |
29-Julai-2025 |
| 103 |
NSC 02 |
MS 1079:1987 |
Method of test for determination of total anionic detergent by hyamine titration |
22-Ogos-2025 |
| 104 |
NSC 02 |
MS 1080:1987 |
Method of test for determination of total non-ionic detergent by batch technique |
22-Ogos-2025 |
| 105 |
NSC 02 |
MS 1189:1990 |
Specification for laundry bar soap |
22-Ogos-2025 |
| 106 |
NSC 02 |
MS 1526:2014 |
Floor liquid detergents - Specification (First revision) |
22-Ogos-2025 |
| 107 |
NSC 02 |
MS 1570:2003 |
Method of test for chemical analysis of putty lime |
22-Ogos-2025 |
| 108 |
NSC 02 |
MS 1996:2016 |
Terminology relating to lime and lime products (As used by the industry) (First revision) |
22-Ogos-2025 |
| 109 |
NSC 02 |
MS 2258:2019 |
Quicklime, hydrated lime, putty lime and limestone for chemical and industrial uses - Specification (First revision) |
22-Ogos-2025 |
| 110 |
NSC 02 |
MS 2559:2014 |
Limestone, quicklime, hydrated lime and putty lime - Methods for physical testing |
22-Ogos-2025 |
| 111 |
NSC 02 |
MS 2632:2017 |
Lime and lime products - Additives for plastering mortar - Specifications |
22-Ogos-2025 |
| 112 |
NSC 02 |
MS 2633:2018 |
Household laundry detergent powder - Specification |
22-Ogos-2025 |
| 113 |
NSC 02 |
MS 647:1999 |
Specification for sodium hypochlorite solutions (First revision) |
22-Ogos-2025 |
| 114 |
NSC 02 |
MS 651:2011 |
Limestone for making colourless glasses - Specification (First revision) |
22-Ogos-2025 |
| 115 |
NSC 02 |
MS 849:2017 |
Lime and lime products - Sampling, sample preparation, packaging and marking (Second revision) |
22-Ogos-2025 |
| 116 |
NSC 02 |
MS ISO 1065:2010 |
Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents - Determination of cloud point (ISO 1065:1991, IDT) |
22-Ogos-2025 |
| 117 |
NSC 02 |
MS ISO 1066:2006 |
Analysis of soaps - Determination of glycerol content - Titrimetic method (ISO 1066:1975, IDT) |
22-Ogos-2025 |
| 118 |
NSC 02 |
MS ISO 10677:2012 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials (ISO 10677:2011, IDT) |
22-Ogos-2025 |
| 119 |
NSC 02 |
MS ISO 13124:2012 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for interfacial bond strength of ceramic materials (ISO 13124:2011, IDT) |
22-Ogos-2025 |
| 120 |
NSC 02 |
MS ISO 14703:2009 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders (First revision) |
22-Ogos-2025 |
| 121 |
NSC 02 |
MS ISO 14704:2018 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature (Second revision) (ISO 14704:2016, IDT) |
22-Ogos-2025 |
| 122 |
NSC 02 |
MS ISO 14705:2009 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (First revision) |
22-Ogos-2025 |
| 123 |
NSC 02 |
MS ISO 15165:2005 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Classification system |
22-Ogos-2025 |
| 124 |
NSC 02 |
MS ISO 15490:2008 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature |
22-Ogos-2025 |
| 125 |
NSC 02 |
MS ISO 15732:2011 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge pre-cracked beam (SEPB) method |
22-Ogos-2025 |
| 126 |
NSC 02 |
MS ISO 17092:2007 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions (ISO 17092:2005, IDT) |
22-Ogos-2025 |
| 127 |
NSC 02 |
MS ISO 17561:2018 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance (First revision) (ISO 17561:2016, IDT) |
22-Ogos-2025 |
| 128 |
NSC 02 |
MS ISO 17562:2018 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique (First revision) (ISO 17562:2016, IDT) |
22-Ogos-2025 |
| 129 |
NSC 02 |
MS ISO 17565:2008 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature (ISO 17565:2003, IDT) |
22-Ogos-2025 |
| 130 |
NSC 02 |
MS ISO 18757:2008 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the bet method (ISO 18757:2003, IDT) |
22-Ogos-2025 |
| 131 |
NSC 02 |
MS ISO 20502:2009 |
Fine Ceramics (Advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (First revision) |
22-Ogos-2025 |
| 132 |
NSC 02 |
MS ISO 20507:2018 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Vocabulary (First revision) (ISO 20507:2014, IDT) |
22-Ogos-2025 |
| 133 |
NSC 02 |
MS ISO 20508:2008 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Determination of light transmittance of ceramic films with transparent substrate (First revision) (ISO 20508:2003, IDT) |
22-Ogos-2025 |
| 134 |
NSC 02 |
MS ISO 20509:2006 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Determination of oxidation resistance of non-oxide monolithic ceramics (ISO 20509:2003, IDT) |
22-Ogos-2025 |
| 135 |
NSC 02 |
MS ISO 22197-1:2018 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide (First revision) (ISO 22197-1:2016, IDT) |
22-Ogos-2025 |
| 136 |
NSC 02 |
MS ISO 22214:2007 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for cyclic bending fatigue of monolithic ceramics at room temperature |
22-Ogos-2025 |
| 137 |
NSC 02 |
MS ISO 22215:2006 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for tensile creep of monolithic ceramics |
22-Ogos-2025 |
| 138 |
NSC 02 |
MS ISO 2271:2003 |
Surface active agents - Detergents - Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure (ISO 2271:1989, IDT) |
22-Ogos-2025 |
| 139 |
NSC 02 |
MS ISO 2272:2007 |
Surface active agents - Soaps - Determination of low contents of free glycerol by molecular absorption spectrometry (ISO 2272:1989, IDT) |
22-Ogos-2025 |
| 140 |
NSC 02 |
MS ISO 23145-1:2008 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramics Powders - Part 1: Tap density |
22-Ogos-2025 |
| 141 |
NSC 02 |
MS ISO 24235:2008 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Determination of particle size distribution of ceramics by laser diffraction method |
22-Ogos-2025 |
| 142 |
NSC 02 |
MS ISO 26424:2009 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coating by micro-scale abrasion test |
22-Ogos-2025 |
| 143 |
NSC 02 |
MS ISO 28703:2012 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for thermal-shock resistance of porous ceramics (ISO 28703:2011, IDT) |
22-Ogos-2025 |
| 144 |
NSC 02 |
MS ISO 28704:2012 |
Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for cyclic bending fatigue of porous ceramics at room temperature (ISO 28704:2011, IDT) |
22-Ogos-2025 |
| 145 |
NSC 02 |
MS ISO 2870:2010 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions (ISO 2870:2009, IDT) |
22-Ogos-2025 |
| 146 |
NSC 02 |
MS ISO 2871-1:2017 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass-cationic-active matter (First revision) (ISO 2871-1:2010, IDT) |
22-Ogos-2025 |
| 147 |
NSC 02 |
MS ISO 2871-2:2017 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (Between 200-500) (First revision) (ISO 2871-2:2010,IDT) |
22-Ogos-2025 |
| 148 |
NSC 02 |
MS ISO 4313:2010 |
Washing powders - Determination of total phosphorus (V) Oxide content - Quinoline phosphomolybdate gravimetric method (ISO 4313:1976, IDT) |
22-Ogos-2025 |
| 149 |
NSC 02 |
MS ISO 4317:2017 |
Surface-active agents and detergents - Determination of water content - Karl Fischer method (First revision) (ISO 4317:2011,IDT) |
22-Ogos-2025 |
| 150 |
NSC 02 |
MS ISO 4318:2007 |
Surface active agents and soaps - Determination of water content - Azeotropic distillation method (ISO 4318:1989, IDT) |
22-Ogos-2025 |
| 151 |
NSC 02 |
MS ISO 456:2005 |
Surface active agents - Analysis of soaps - Determination of free caustic alkali (ISO 456:1973, IDT) |
22-Ogos-2025 |
| 152 |
NSC 02 |
MS ISO 607:2004 |
Surface active agents - Methods of sample division (ISO 607:1980, IDT) |
22-Ogos-2025 |
| 153 |
NSC 02 |
MS ISO 6486-1:2003 |
Ceramic ware, glass ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 1: Test method (ISO 6486-1:1999, MOD) |
22-Ogos-2025 |
| 154 |
NSC 02 |
MS ISO 6486-2:2003 |
Ceramic ware, glass ceramic ware and glass dinnerware in contact with food - Release of lead and cadmium - Part 2: Permissible limits (ISO 6486-2:1999, IDT) |
22-Ogos-2025 |
| 155 |
NSC 02 |
MS ISO 672:2006 |
Soaps - Determination of moisture and volatile matter content - Oven method (ISO 672:1978, IDT) |
22-Ogos-2025 |
| 156 |
NSC 02 |
MS ISO 673:2004 |
Soaps - Determination of content of ethanol-insoluble matter (ISO 673:1981, IDT) |
22-Ogos-2025 |
| 157 |
NSC 02 |
MS ISO 6841:2010 |
Surface active agents - Technical straight-chain sodium alkylbenzenesulfonates - Determination of mean relative molecular mass by gas-liquid chromatography (ISO 6841:1988, IDT) |
22-Ogos-2025 |
| 158 |
NSC 02 |
MS ISO 685:2006 |
Analysis of soaps - Determination of total alkali content and total fatty matter content (ISO 685:2006, IDT) |
22-Ogos-2025 |
| 159 |
NSC 02 |
MS ISO 862:2005 |
Surface active agents - Vocabulary (ISO 862:1984 and its technical corrigendum 1:1993, IDT) |
22-Ogos-2025 |
| 160 |
NSC 02 |
MS ISO 8799:2010 |
Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter (ISO 8799:2009, IDT) |
22-Ogos-2025 |
| 161 |
NSC 19 |
MS IEC 60238:2008 |
Edison screw lampholders (First revision) (IEC 60238:2004, IDT) |
02-September-2025 |
| 162 |
NSC 19 |
MS IEC 60838-2-2:2008 |
Miscellaneous lampholders Part 2: Particular requirements - Connectors for led modules (IEC 60838-2-2:2006, IDT) |
02-September-2025 |
| 163 |
NSC 19 |
MS IEC 60921:2013 |
Ballasts for tubular fluorescent lamps - Performance requirements (First revision) (IEC 60921:2006, IDT) |
02-September-2025 |
| 164 |
NSC 19 |
MS IEC 61184:2014 |
Bayonet lampholders (First revision) (IEC 61184:2008, IDT) |
02-September-2025 |
| 165 |
NSC 19 |
MS 141:2014 |
Ballasts for tubular fluorescent lamps - Performance (watt loss) requirements (Second revision) |
02-September-2025 |
| 166 |
NSC 23 |
MS ISO 14123-2:2020 |
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015, IDT) (First revision) |
02-September-2025 |
| 167 |
NSC 23 |
MS ISO 21469:2007 |
Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006, IDT) |
02-September-2025 |
| 168 |
NSC 23 |
MS ISO 29042-8:2012 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Room method for the measurement of the pollutant concentration parameter (ISO 29042-8:2011, IDT) |
02-September-2025 |
| 169 |
NSC 23 |
MS ISO 29042-9:2012 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Decontamination index (ISO 29042-9:2011, IDT) |
02-September-2025 |
| 170 |
NSC 06 |
MS 1968:2007 |
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption – Technical delivery conditions |
04-September-2025 |
Soalan Lazim
Hubungi Kami
Maklumbalas & Aduan
Peta Laman
AWAM
STAF