Soalan Lazim
Hubungi Kami
Maklumbalas & Aduan
Peta Laman
AWAM
STAFJabatan Standard Malaysia (JSM), sebagai Badan Standard Kebangsaan bertanggungjawab membangunkan Malaysian Standards (MS) seperti yang yang diperuntukkan di dalam Akta Standard Malaysia 1996 [Akta 549] berdasarkan proses pembangunan MS yang telah ditetapkan dan diiktiraf. Bagi Bil. 7/2024, terdapat:
6 Malaysian Standards (MS) (New):
| Bil. | No. MS | Tajuk MS | Pautan |
|---|---|---|---|
| 1 | MS IEC 60502-2:2024 | Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um = 1,2 kV) up to 30 kV (Um = 36kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (36 kV) (IEC 60502-2:2014, IDT) | |
| 2 | MS 60296:2024 | Fluids for electrotechnical applications – Mineral insulating oils for electrical equipment (IEC 60296:2020, MOD) | Papar |
| 3 | MS 60475:2024 | Method of sampling insulating liquids (IEC 60475:2022 CMV, MOD) | Papar |
| 4 | MS ISO 56001:2024 | Innovation management system – Requirements (ISO 56001:2024, IDT) | Papar |
| 5 | MS 2754-2:2024 | Sharing economy – Part 2: General trustworthiness and safety requirements for digital platforms | Papar |
| 6 | MS ISO 20658:2023 | Requirements for the collection and transport of samples for medical laboratory examinations (ISO 20658:2023, IDT) | Papar |
4 Malaysian Standards (MS) (Revision):
| Bil. | No. MS | Tajuk MS | Pautan |
|---|---|---|---|
| 1 | MS 137:2024 | Electric cables - Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and control gear wiring (First revision) | Papar |
| 2 | MS 1142:2024 | Copper and copper-cadmium stranded conductors for overhead electric traction and power transmission systems (First revision) | Papar |
| 3 | MS 1288:2024 | Photocopy paper – Specification (Second revision) | Papar |
| 4 | MS IEC 60364-7-710:2021 | Low-voltage electrical installations – Part 7-710: Requirements for special installations or locations – Medical locations (First revision) (IEC 60364-7-710:2021, IDT) | Papar |
36 Malaysian Standards (MS) (Withdrawal with Replacement):
| Bil. | No. MS | Tajuk MS | Justifikasi |
|---|---|---|---|
| 1 | MS 466:1987 | Methods of sampling and testing field latex (First revision) | MS 466:1987 has been replaced by the latest edition as follows:
|
| 2 | MS ISO 125:2007 | Natural rubber latex concentrate - Determination of alkalinity (ISO 125:2003, IDT) | MS ISO 125:2007 has been replaced by MS ISO 125:2020 Natural rubber latex concentrate - Determination of alkalinity (First revision) (ISO 125:2020, IDT) |
| 3 | MS 62612:2012 (P) | Self-ballasted LED-lamps for general lighting services - Performance requirements | MS 62612:2012 (P) has been replaced by MS IEC 62612:2015 Self-ballasted LED-lamps for general lighting services with supply voltages > 50 V - Performance requirements (IEC 62612:2013, IDT) |
| 4 | MS 62717:2012 (P) |
LED modules for general lighting - Performance requirements |
MS 62717:2012 (P) has been replaced by MS IEC 62717:2017 LED modules for general lighting - Performance requirements (IEC 62717:2014, AMD 1:2015, IDT) |
| 5 | MS IEC 62717:2017 | LED modules for general lighting - Performance requirements (IEC 62717:2014, AMD 1:2015, IDT) | MS IEC 62717:2017 has been replaced by MS IEC 62717:2021 LED modules for general lighting - Performance requirements (Second revision) (IEC 62717:2014+AMD1:2015+AMD2:2019, IDT) |
| 6 | MS 62722-1:2012 | Luminaire performance - Part 1: General requirements | MS 62722-1:2012 has been replaced by MS 62722-1:2017 Luminaire performance - Part 1: General requirements (First revision) (IEC 62722-1:2014, IDT) |
| 7 | MS 62722-2-1:2012 | Luminaire performance - Part 2-1: Particular requirements for LED luminaires | MS 62722-2-1:2012 has been replaced by MS IEC 62722-2-1:2017 Luminaire performance - Part 2-1: Particular requirements for LED luminaires (First revision) (IEC 62722-2-1: 2014, IDT) |
| 8 | MS 1926:2006 | Tourism Services - Hotels and Other Types of Tourism Accommodation - Terminology (ISO 18513:2003, MOD) | MS 1926:2006 has been replaced by MS 1926:2019 Tourism Services - Hotels and Other Types of Tourism Accommodation - Terminology (First Revision) (ISO 18513:2003, MOD) |
| 9 | MS ISO 16175-1:2012 | Information and documentation – Principles and functional requirements for records in electronic office environments – Part 1: Overview and statement of principles (ISO 16175-1:2010, IDT) | MS ISO 16175-1:2012 has been replaced by MS ISO 16175-1:2020 Information and documentation – Processes and functional requirements for software for managing records – Part 1: Functional requirements and associated guidance for any applications that manage digital records (First revision) (ISO 16175-1:2020, IDT) |
| 10 | MS ISO 11799:2011 | Information and documentation - Document storage requirements for archive and library materials (ISO 11799:2003 (2008), IDT) | MS ISO 11799:2011 has been replaced by MS ISO 11799:2020 Information and documentation - Document storage requirements for archive and library materials (First revision) (ISO 11799:2015, IDT) |
| 11 | MS 2223-1:2015 (BM) | Maklumat dan pendokumenan - Pengurusan rekod - Bahagian 1: Am (ISO 15489-1:2001, IDT) | MS 2223-1:2015 (BM) has been replaced by MS ISO 15489-1:2020 (BM) Maklumat dan pendokumenan – Pengurusan rekod - Bahagian 1: Konsep dan prinsip (ISO 15489-1:2016, IDT) |
| 12 | MS ISO GUIDE 27:1983 | Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of conformity (ISO GUIDE 27:1983 (2003), IDT) (Published by DSM in 2007) | MS ISO GUIDE 27:1983 has been replaced by MS ISO/IEC 17030:2021 Conformity assessment – General requirements for third-party marks of conformity |
| 13 | MS ISO/IEC 17030:2003 | Conformity assessment – General requirements for third-party marks of conformity (ISO/IEC 17030:2003, IDT) (Published by DSM in 2006) | MS ISO/IEC 17030:2003 has been replaced by MS ISO/IEC 17030:2021 Conformity assessment – General requirements for third-party marks of conformity |
| 14 | MS ISO/IEC 17043:2010 | Conformity assessment – General requirements for proficiency testing (ISO/IEC 17043:2010, IDT) (Published by STANDARDS MALAYSIA in 2011) | MS ISO/IEC 17043:2010 has been replaced by MS ISO/IEC 17043:2023 Conformity assessment – General requirements for the competence of proficiency testing providers (First revision) (ISO/IEC 17043:2023, IDT) |
| 15 | MS 1280:1992 | Specification for fresh orchid cut flowers (Spray type) | MS 1280:1992 has been replaced by MS 1280:2015 Fresh Cut Orchid - Specification (First revision) |
| 16 | MS 227:2005 | Fish meal – Specification (First revision) | MS 227:2005 has been replaced by MS 227:2016 Fish Meal For Animal Feed Specification (Second revision) |
| 17 | MS 2424:2012 AMD.1:2014 | Halal pharmaceuticals - General guidelines AMENDMENT 1 | MS 2424:2012 AMD.1:2014 has been replaced by MS 2424:2019 Halal pharmaceuticals - General requirements (First revision) |
| 18 | MS ISO 765:2006 | Pesticides considered not to require common names (ISO 765:1976, IDT) | MS ISO 765:2006 has been replaced by MS ISO 765:2018 Pesticides considered not to require common names (ISO 765:2016, IDT) (First revision) |
| 19 | MS ISO 534:2007 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2005, IDT) | MS ISO 534:2007 has been replaced by MS ISO 534:2018 Paper and board – Determination of thickness, density and specific volume (ISO 534:2011, IDT) (First revision) |
| 20 | MS ISO 302:2009 | Pulps - Determination of Kappa number (ISO 302:2004, IDT) | MS ISO 302:2009 has been replaced by MS ISO 302:2018 Pulps – Determination of Kappa number (ISO 302:2015, IDT) (First revision) |
| 21 | MS ISO 1974:1999 | Paper - Determination of tearing resistance (Elmendorf Method) (ISO 1974:1990, IDT) | MS ISO 1974:1999 has been replaced by MS ISO 1974:2018 Paper – Determination of tearing resistance – Elmendorf method (ISO 1974:2012, IDT) (First revision) |
| 22 | MS 2258:2009 | Quicklime, hydrated lime, putty lime and limestone for chemical and industrial uses – Specification | MS 2258:2009 has been replaced by MS 2258:2019 Quicklime, hydrated lime, putty lime and limestone for chemical and industrial uses – Specification (First revision) |
| 23 | MS 2037:2006 | Water quality - Determination of total suspended solids by filtration through glass-fibre filters | MS 2037:2006 has been replaced by MS 2037:2019 Water quality - Determination of total suspended solids by filtration through glass-fibre filters (First revision) |
| 24 | MS 1174:2000 | Specification for large wooden pallets through transit of goods (First revision) | MS 1174:2000 has been replaced by MS 1174:2010 Large wooden pallets – Principal dimensions and tolerance (Second revision) |
| 25 | MS 1561:2002 | Pallets for materials handling - Vocabulary | MS 1561:2002 Pallets has been replaced by MS ISO 445:2010 Pallets for materials handling – Vocabulary (First revision) (ISO 445:2008, IDT) |
| 26 | MS ISO 13485:2006 | Medical devices – Quality management systems – Requirements for regulatory purpose (Including COR. 1:2009) (ISO 13485:2003, IDT) | MS ISO 13485:2006 is superseded and replaced by MS ISO 13485:2017 Medical devices – Quality management systems – Requirements for regulatory purposes (First revision) (ISO 13485:2016, IDT) |
| 27 | MS IEC 60601-2-19:2007 | Medical electrical equipment - Part 2-19: Particular requirements for safety on baby incubators (IEC 60601-2-19:1995 and its amendment 1:1996, IDT) | MS IEC 60601-2-19:2007 is superseded and replaced by MS IEC 60601-2-19:2018 Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators (First revision) (IEC 60601-2-19:2016, IDT) |
| 28 | MS IEC 60601-2-20:2007 | Medical electrical equipment - Part 2-20: Particular requirements for safety of transport incubators (IEC 60601-2-20:1990, IDT) | MS IEC 60601-2-20:2007 is superseded and replaced by MS IEC 60601-2-20:2018 Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators (First revision) (IEC 60601-2-20:2016, IDT) |
| 29 | MS IEC 60601-2-50:2007 | Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment (IEC 60601-2-50:2005, IDT) | MS IEC 60601-2-50:2007 is MS IEC 60601-2-50:2018 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (First revision) (IEC 60601-2-50:2016, IDT) |
| 30 | MS 838:2007 | Code of practice for radiation protection – Medical X-ray diagnosis (First revision) | MS 838:2007 is superseded and replaced by MS 838:2018 - Radiation protection for medical diagnostic X-ray - Code of practice (Second revision) |
| 31 | MS 1042: Part 1:2007 | Safety in Laboratories-Code of practice - Part 1: General (First revision) | MS 1042: Part 1:2007 has been replaced by MS 1042-1:2023 Safety in Laboratories-Code of practice-Part 1: General (Second revision) |
| 32 | MS 1042-2:2009 | Safety in laboratories - Code of practice - Part 2: Chemical aspects (First revision) | MS 1042-2:2009 has been replaced by MS 1042-2:2023 Safety in laboratories - Code of practice: Chemical aspects (Second revision) |
| 33 | MS 1042: Part 4:1992 | Code of practice for safety in laboratories Part 4: Ionizing radiation | MS 1042: Part 4:1992 has been replaced by MS 1042-4:2023 Safety in laboratories - Code of practice - Part 4: Ionising radiations (First revision) |
| 34 | MS 1042- 7: 2011 | Safety in laboratories - Code of practice - Part 7: Fume cupboards | MS 1042-7:2011 has been replaced with MS 1042-7:2023 Safety in laboratories - Code of practice - Part 7: Fume cupboards (First revision) |
| 35 | MS 2558:2014 | Safety and health signage used in the workplace - Specification (First revision) | MS 2558:2014 has been replaced by MS 2558:2022 Safety and health signage used in the workplace - Specification (Second revision) |
| 36 | MS 2558:2014, ERR. 1:2016 | Safety and health signage used in workplace - Specification (First revision) ERRATA 1 | MS 2558:2014, ERR. 1:2016 has been included in MS 2558:2022 Safety and health signage used in the workplace - Specification (Second revision) |