Accessibility Tools

  • Content scaling 100%
  • Font size 100%
  • Line height 100%
  • Letter spacing 100%
  
  
 
  • SCHEDULE

    No. No. MS Year Title
     1. MS ISO 41014 2020 Facility management - Development of a facility management strategy (ISO 41014:2020, IDT)
     2. MS ISO 41018 2022 Facility management - Development of a facility management policy (ISO 41018:2022, IDT)
    3. MS 2766 2024 Polymer modified bitumen (PMB) for asphalt pavement application - Specification
      
    Year 2024 

    Date of Minister Approval

    New

    Revision

    Withdrawal

    Amendment

    Change in Title / Number of Malaysian Standard

     19 January 2024   3   8   20    
  • SCHEDULE

    No. No. MS Year Title
    1. MS ISO/IEC 17030 2021 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2021, IDT)
    2. MS ISO/IEC 17043 2023 Conformity assessment - General requirements for the competence of proficiency testing providers (ISO/IEC 17043:2023, IDT)
    3. MS 775 2024 LPG fuel system in internal combustion engines - Specification (Second revision)
    4. MS 1787-7 2024 Wood-based panels - Part 7: Determination of dimensional changes associated with changes in relative humidity
    5. MS 1787-8 2024 Wood-based panels - Part 8: Determination of moisture resistance under cyclic test conditions
    6. MS 1787-11 2024 Wood-based panels - Part 11: Determination of tensile strength perpendicular to the plane of the panel
    7. MS ISO 14031 2021 Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2021, IDT)
    8. MS 544-9-1 2024 Code of practice for structural use of timber - Part 9: Fire resistance of timber structures - Section 1: Method of calculation fire resistance of timber members (Second revision)
      
    Year 2024 

    Date of Minister Approval

    New

    Revision

    Withdrawal

    Amendment

    Change in Title / Number of Malaysian Standard

     19 January 2024   3   8   20    
  • SCHEDULE WITHDRAWAL WITHOUT REPLACEMENT

    No. No. MS Year Title
    1. MS ISO 11210 1997 Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinatemity 
    2. MS ISO 11427 2010 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using pottasium bromide (ISO 11427:1993, COR. 1:1994, IDT)
    3. MS ISO 11495 2010 Jewellery - Determination of palladium in palladium jewellery alloys - Inductively coupied plasma (ICP) solution-spectrometric method using yttrium as internal standard element (ISO 11495:2008, IDT)
    4. MS ISO 11494 2010 Jewellery - Determination of platinum in platinum jewellery alloys - Inductively coupied plasma (ICP) solution-spectrometric method using yttrium as internal standard element (ISO 11494:2008, IDT)
    5. MS ISO 15093 2010 Jewellery - Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys - Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES) (ISO 15093:2008, IDT)
    6. MS ISO 15096 2010 Jewellery - Determination of silver in 999 0/00 silver jewellery alloys - Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES) (ISO 15096:2008, IDT)
    7. MS 1365: Part 2 2000 Method of test for determination of standard of fineness for precious metal - Part 2: Silver and articles of silver by titrimetric (Potentiometric) method
    8. MS ISO 11490 2006 Determination of palladium in palladium jewellery alloys - Gravimetric determination with Dimethylglyoxime (ISO 11490:1995, IDT)
    9. MS 817: Part 2 1998 Methods of test for palm oil and palm oil products - Part 2: Determination of moisture and volatile matter content (Second revision) (ISO 662:1980, IDT)
    10. MS 817: Part 3 1998 Methods of test for palm oil and palm oil products - Part 3: Determination of iodine value (Second revision) (ISO 3961:1996)
    11. MS 817: Part 4 1998 Methods of test for palm oil and palm oil products - Part 4: Determination of water content - Karl Fisher method (ISO 8534:1996, IDT)
    12. MS 817: Part 5 1998 Methods of test for palm oil and palm oil products - Part 5: Determination of Anisidine value (Second revision) (ISO 6885:1989, IDT)
    13. MS 817: Part 6 2001 Methods of test for palm oil and palm oil products - Part 6: Determination of Tocopherols and Tocotrienols content - Method using high-performance liquid chromatography (Second revision) (ISO 9936:1997, IDT)
    14. MS 817: Part 7: Sec. 1 2001 Methods of test for palm oil and palm oil products - Part 7: Determination on unsaponifiable matter - Section 1: Method using Diethyl Ether extraction (Reference method) (ISO 3596:2000, IDT)
    15. MS 817: Part 7: Sec. 2 2001 Methods of test for palm oil and palm oil products - Part 7: Determination on unsaponifiable matter - Section 2: Rapid method using hexane extraction (ISO 18609:2000, IDT)
    16. MS 817: Part 8: Sec. 1 2001 Methods of test for palm oil and palm oil products - Part 8: Determination of triacyglycerol by gas chromatography - Section 1: Triacyglycerol composition by carbon number
    17. Ms 817: Part 9: Sec. 1 2003 Methods of test for palm oil and palm oil products - Part 9: Determination of solid fat content by pulsed nuclear magnetic resonance (PNMR) - Section 1: Direct method
    18. MS 817: Part 9: Sec. 2 2003 Methods of test for palm oil and palm oil products - Part 9: Determination of solid fat content by pulsed nuclear magnetic resonance (PNMR) - Section 2: Indirect method
    19. MS 817: Part 11 2004 Palm oil and palm oil products - Part 11: Determination of peroxide value (ISO 3960:1998, MOD)
    20. MS 817: Part 12 2004 Palm oil and palm oil products - Part 12: Determination of Lovibond colour (ISO 15305:1998, MOD)

    SCHEDULE WITHDRAWAL WITH REPLACEMENT

    No. No. MS Year Title Replace by
             
      
    Year 2024 

    Date of Minister Approval

    New

    Revision

    Withdrawal

    Amendment

    Change in Title / Number of Malaysian Standard

     19 January 2024   3   8   20    
  •  
    SCHEDULE
     
    No. No. MS Year Title
           
      
    Year 2024 

    Date of Minister Approval

    New

    Revision

    Withdrawal

    Amendment

    Change in Title / Number of Malaysian Standard

     19 January 2024   3   8   20    
  •  
    SCHEDULE
     
    No. Previous New Remarks

     

     

     

     

      
    Year 2024 

    Date of Minister Approval

    New

    Revision

    Withdrawal

    Amendment

    Change in Title / Number of Malaysian Standard

     19 January 2024   3   8   20    
Level 4-7, Tower 2
Menara Cyber Axis
Jalan Impact, Cyber 6
63000 Cyberjaya
Selangor, MALAYSIA

Tel : +603-8008 2900
Fax : +603-8008 2901
Email : central[at]jsm[dot]gov[dot]my

Today 190

Yesterday 1765

This Week 6324

This Month 190

Total 600589

We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.