Standards

Under Development

Note: Download all Documents

 

No. Title of DMS Scope Link for comment
NSC 16 - Metallic Materials and Finished Products
1. 20P002R2
- Prestressing Steel - Part 3: Steel Bars (Quenched and Tempered)
This part of Malaysian Standard specifies requirements for round bar made of quenched and tempered high tensile steel, with a surface which is either plain, ribbed, grooved or indented.

The product is delivered in coils, according to the general requirements specified in MS 1138: Part 1

2. 21P007R1
– Steel Names Based on Letter Symbols
This document specifies rules for the designation of internationally standardized steel grades by means of symbolic letters and numbers to express application and principal characteristics (e.g. mechanical, physical, chemical) so as to provide an abbreviated identification of steel grades.

NOTE 1 In order to avoid ambiguity, the principal symbols established according to this document can be supplemented by additional symbols identifying additional characteristics of the steel or steel product, e.g. suitability for use at high or low temperatures, surface condition, treatment condition, deoxidation.

NOTE 2 These rules can also be applied to nationally or regionally standardized steels

No. Title of DMS Scope Link for comment
NSC 12 – Transport
1. 19L006N
– Used motor vehicle – Classification – Requirements for evaluation
This Malaysian Standard specifies the requirements for organisations performing evaluation of used motor vehicles. It applies to motor vehicle categories (L, M1 and N1) as classified in accordance with MS 1822.
No. Title of DMS Scope Link for comment
NSC 18 – Medical Devices and Facilities for Healthcare
1. 20R004N:
Healthcare Waste Management Services in Healthcare Facilities
This Malaysian Standard specifies general requirements and principles for good healthcare waste management services in the following types of healthcare facilities:
a. Public and private hospitals
b. Healthcare institutions
c. Clinics except remote inaccessible clinics.

This document is applicable only to established healthcare facilities. It focuses on hazardous healthcare waste with the exclusion of radioactive waste.

No. Title of DMS Scope Link for comment
NSC 27 – SMART CITY
1. 21D028N:
Sustainable cities and communities – Vocabulary (ISO 37100:2016, IDT) (Published by Standards Malaysia in 2022)
This document defines terms relating to sustainable development in communities, smart community infrastructure and related subjects
NSC 10 – Plastics and Plastics Products
1. 21J001R2:
Glass-fibre reinforced polyester panels and panel water tanks – Part 1: Specification (Second Revision)
(IEC 62443-3-2:2020, IDT) (Published by Standards Malaysia in 2022)
This Malaysian Standard specifies requirements for glass-fibre reinforced polyester panels used in the construction of panel water tank for the sanitary storage of potable water. It is called GRP panel water tanks hereafter.

NOTE. GRP is also termed as fibreglass reinforced polyester (FRP) in this standard.

2. 21J103N:
Glass-fibre reinforced polyester panels and panel water tanks – Part 2: Guidance for the assessment of conformity/td>
This Malaysian Standard gives guidance for the assessment of conformity of products in accordance with the applicable part(s) of MS 1390 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures.

This Malaysian Standard specifies requirements for glass fibre reinforced polyester panels used in the construction of panel water tank for the sanitary storage of potable water. It is called GRP panel water tanks hereafter.

NOTE:

1. GRP is also termed as fibreglass reinforced polyester (FRP) in this standard.
2. It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national guidance or regulations and installation practices or codes.
NSC 06 – Mechanical Engineering
1. 22F002N:
Light gauge stainless steel tubes for ordinary piping
This Malaysian Standard specifies stainless steel tubes (straight tubes and coiled tubes, hereafter referred to as tubes) used for piping of water supply, hot water supply, drainage, chilled/heated water supply, fire-fighting water supply and others. This standard is applicable to tubes of outside diameter 9.52mm (designation 8Su) to 318.5mm (designation 300Su).
2. 20F015R1:
Welded stainless steel tubes for the conveyance of water and other aqueous liquids – Technical delivery conditions and includes amendment A1 (First revision)
This European Standard specifies the technical delivery conditions for light gauge welded stainless steel tubes, primarily for water applications, supplied in straight lengths and for use at ambient temperatures. This document does not cover applications where elevated temperature properties are required. The tube is suitable for use with compression fittings or press fittings and for adhesive bonding, silver brazing or inert gas welding of capillary fittings. The document is applicable to tubes in the size range from 6 mm to 267 mm outside diameter made of stainless (except martensitic and precipitation hardening) steel grades taken from EN 10088-2.
NSC 23 – Occupational Safety and Health/strong>
1. 20W009R2 :
Safety in Laboratories - Code of Practice - Part 1: General (Second Revision)
This Malaysian Standard provides information and sets out recommendations; general procedures and precautions designed to promote safety of persons and property in laboratory operations. The safety aspects described in this Standard apply to personnel, including students, visitors, maintenance staff, cleaners, laboratory staff, contractors, security staff and other authorized personnel who use the laboratory facilities.
No. Title of DMS Scope Link for comment
NSC 12 – Transport
1. 21L007N:
Road traffic safety – Good practices for platform provider in implementing work-related road traffic safety management
This standard provides guidelines for good practices that can be adopted by any platform providers in the transport sector including e-hailing and p-hailing operators for the implementation of work-related road traffic safety management.

These practices are intended to reduce death and serious injuries related to road traffic crashes which it can influence.

This document is applicable to any platform providers to offer further protection to the platform drivers as well as other road users through the adoption of a proactive approach to manage work-related road risks.

NSC 17 – Textiles & Apparels
1. 18Q002R1:
DMS 629 : 1983 Fishing nets-Specification (First revision)
This Malaysian Standard specifies the quality requirements and method of test for fishing nets.