Standards

Ulasan Umum

( Click here) for feedback on MS for withdrawal without replacement.

1 OCTOBER 2021 – 30 NOVEMBER 2021
No. MS Number MS Title NSC Approval Date Justification for withdrawal
NSC B- Chemicals and Materials
1. MS ISO/TS 10867:2012 Nanotechnologies – Characterization of Single-Wall Carbon Nanotubes Using Near Infrared Photoluminescence Spectroscopy (ISO/TS 10867:2010, IDT) 27/09/2021 Technical committee decided to withdraw without replacement this standard since:

a) It has new version at ISO level (2019)

b) No sales record from year 2018 until 2020

c) Specifically for lab uses

2. MS ISO/TS 11251:2012 Nanotechnologies – Characterization of Volatile Components in Single-Wall Carbon Nanotube Samples Using Evolved Gas Analysis/Gas Chromatography-Mass Spectrometry (ISO/TS 11251:2010, IDT) 27/09/2021 Technical committee decided to withdraw without replacement this standard since:

a) It has new version at ISO level (2019)

b) No sales record from year 2018 until 2020

c) Specifically for lab uses

15 SEPTEMBER 2021 – 14 NOVEMBER 2021
No. MS Number MS Title NSC Approval Date Justification for withdrawal
NSC F – Mechanical Engineering
1. MS ISO 10510:2012 Tapping Screw and Washer Assemblies with Plain Washers (ISO 10510:2011, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 10510:2011. The standard was last reviewed and confirmed in 2016.

2. MS ISO 10666:2013 Drilling Screws with Tapping Screw Thread - Mechanical and Functional Properties (ISO 10666:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 10666:1999. The standard was last reviewed and confirmed in 2019.

3. MS ISO 14585:2012 Hexabular Socket Pan Head Tapping Screws (ISO 14585:2011, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 14585:2011. The standard was last reviewed and confirmed in 2016.

4. MS ISO 14586:2012 Hexabular Socket Countersunk Head Tapping Screws (ISO 14586:2011, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 14586:2011. The standard was last reviewed and confirmed in 2016.

5. MS ISO 14587:2012 Hexabular Socket Raised Countersunk (Oval) Head Tapping Screws (ISO 14587:2011, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 14587:2011. The standard was last reviewed and confirmed in 2016.

6. MS ISO 1479:2013 Hexagon Head Tapping Screws (ISO 1479:2011, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 1479:2011. The standard was last reviewed and confirmed in 2016.

7. MS ISO 1481:2013 Slotted Pan Head Tapping Screws (ISO 1481:2011, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 1481:2011. The standard was last reviewed and confirmed in 2016.

8. MS ISO 1502:2003 (CONFIRMED:2011) ISO General Purpose Metric Screw Threads - Gauges and Gauging (ISO 1502:1996, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 1502:1996. The standard was last reviewed and confirmed in 2016.

9. MS ISO 15480:2013 Hexagon Washer Head Drilling Screws with Tapping Screw Thread (ISO 15480:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 15480:2019.

10. MS ISO 15481:2013 Cross Recessed Pan Head Drilling Screws with Tapping Screw Thread (ISO 15481:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 15481:1999. The standard was last reviewed and confirmed in 2016.

11. MS ISO 15482:2013 Cross Recessed Countersunk Head Drilling Screws with Tapping Screw Thread (ISO 15482:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 15482:1999. The standard was last reviewed and confirmed in 2019.

12. MS ISO 15483:2013 Cross Recessed Raised Countersunk Head Drilling Screws With Tapping Screw Thread (ISO 15483:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 15483:1999. The standard was last reviewed and confirmed in 2019.

13. MS ISO 1891:2012 Fasteners - Terminology (First Revision) (ISO 1891:2009, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

Fasteners - Terminology (First Revision) (ISO 1891:2009, IDT)

14. MS ISO 225:2014 Fasteners - Bolts, Screws, Studs and Nuts - Symbols and Descriptions of Dimensions (First Revision) (ISO 225:2010, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 225:2010. The standard was last reviewed and confirmed in 2020.

15. MS ISO 261:2002 (CONFIRMED:2011) ISO General Purpose Metric Screw Threads - General Plan (ISO 261:1998.IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 261:1998. The standard was last reviewed and confirmed in 2019.

16. MS ISO 262:2002 (CONFIRMED:2011) ISO General Purpose Metric Screw Threads - Selected Sizes for Screws, Bolts and Nuts (ISO 262:1998,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 262:1998. The standard was last reviewed and confirmed in 2019.

17. MS ISO 273:2006 (CONFIRMED:2011) Fasteners - Clearance Holes for Bolts and Screws (ISO 273:1979,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 273:1979. The standard was last reviewed and confirmed in 2019.

18. MS ISO 2901:2003 (CONFIRMED:2011) ISO Metric Trapezoidal Screw Threads - Basic Profile and Maximum Materials Profiles (ISO 2901:1993,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 2901:2016.

19. MS ISO 2902:2003 (CONFIRMED:2011) ISO Metric Trapezoidal Screw Threads - General Plan (ISO 2902;1977,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 2902:2016.

20. MS ISO 2903:2003 (CONFIRMED:2011) ISO Metric Trapezoidal Screw Threads - Tolerances (ISO 2903:1993,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 2903:2016.

21. MS ISO 2904:2003 (CONFIRMED:2011) ISO Metric Trapezoidal Screw Threads - Basic Dimensions (ISO 2904;1977,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 2904:2020.

22. MS ISO 4015:2006 (CONFIRMED:2011) Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter Pitch Diameter) (ISO 4015:1979,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 4015:1979. The standard was last reviewed and confirmed in 2013.

23. MS ISO 4026:2005 (CONFIRMED:2011) Hexagon Socket Set Screws with Flat Point (ISO 4026:2003,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 4026:2003. The standard was last reviewed and confirmed in 2018.

24. MS ISO 4027:2005 (CONFIRMED:2011) Hexagon Socket Set Screws with Cone Point (ISO 4027:2003,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 4027:2003. The standard was last reviewed and confirmed in 2018.

25. MS ISO 4028:2005 (CONFIRMED:2011) Hexagon Socket Set Screws with Dog Point (ISO 4028:2003,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use ISO 4028:2003. The standard was last reviewed and confirmed in 2018.

26. MS ISO 4029:2005 (CONFIRMED:2011) Hexagon Socket Set Screws with Cup Point (ISO 4029:2003,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 4029:2003. The standard was last reviewed and confirmed in 2018.

27. MS ISO 4032:2007 (CONFIRMED:2011) Hexagon Nuts, Style 1 - Product Grades A and B (ISO 4032:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 4032: 2012.

28. MS ISO 4033:2007 (CONFIRMED:2012) Hexagon Nuts, Style 2 - Product Grades A and B (ISO 4033:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 4033:2012.

29. MS ISO 4034:2007 (CONFIRMED:2012) Hexagon Nuts - Product Grade C (ISO 4034:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 4034:2012.

30. MS ISO 4035:2007 (CONFIRMED:2011) Hexagon Thin Nuts (Chamfered) - Product Grades A and B (ISO 4035:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 4035:2012.

31. MS ISO 4036:2007 (CONFIRMED:2011) Hexagon Thin Nuts (Unchamfered) - Product Grade B (ISO 4036:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021 where the ISO 4036:2012 (Withdrawn).
32. MS ISO 4759-3:2006 (CONFIRMED:2011) Tolerances for Fasteners - Part 3: Plain Washers for Bolts, Screws and Nuts - Product Grades A and C (ISO 4759-3:2000, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 4759-3:2016.

33. MS ISO 68-1:2002 (CONFIRMED:2011) ISO General Purpose Metric Screw Threads - Basic Profile - Part 1: Metric Screw Threads (ISO 68-1:1998, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 68-1/AMD 1:2020.

34. MS ISO 7089:2006 (CONFIRMED:2011) Plain Washers - Normal Series - Product Grade A (ISO 7089:2000, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 7089:2000.

35. MS ISO 7090:2006 (CONFIRMED:2011) Plain Washers, Chamfered - Normal Series - Product Grade A (ISO 7090:2000, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 7090:2000

36. MS ISO 7091:2006 (CONFIRMED:2011) Plain Washers - Normal Series - Product Grade C (ISO 7091:2000, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 7091:2000

37. MS ISO 7092:2006 (CONFIRMED:2011) Plain Washers - Small Series - Product Grade A (ISO 7092:2000, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 7092:2000

38. MS ISO 7093-1:2006 (CONFIRMED:2011) Plain Washers - Large Series - Part 1: Product Grade A (ISO 7093-1:2000,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 7093-1:2000

39. MS ISO 7094:2006 (CONFIRMED:2011) Plain Washers - Extra Large Series - Product Grade C (ISO 7094:2000, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 7094:2000

40. MS ISO 724:2002 (CONFIRMED:2011) ISO General Purpose Metric Screw Threads - Basic Dimensions (ISO 724:1993, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 724:1993/COR 1:2009

41. Hexagon Nuts, Style 1, With Metric Fine Pitch Thread - Product Grades A and B (ISO 8673:1999, IDT) Plain Washers - Large Series - Part 1: Product Grade A (ISO 7093-1:2000,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 8673:2012

42. MS ISO 8674:2007 (CONFIRMED:2011) Hexagon Nuts, Style 2, With Metric Fine Pitch Thread - Product Grades A and B (ISO 8674:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 8674:2012.

43. MS ISO 8675:2007 (CONFIRMED:2011) Hexagon Thin Nuts (Chamfered) With Metric Fine Pitch Thread - Product Grades A and B (ISO 8675:1999, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 8675:2012.

44. MS ISO 887:2006 (CONFIRMED:2011) Plain Washers for Metric Bolts, Screws and Nuts for General Purposes - General Plan (ISO 887:2000, IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 887:2000/COR 1:2006.

45. MS ISO 898-1:2003 Mechanical Properties of Fasteners Made of Carbon Steels And Alloy Steel - Part 1: Bolts, Screws and Studs (ISO 898--1:1999,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 898-1:2013

46. MS ISO 898-2:2003 Mechanical Properties Of Fasterners - Part 2: Nuts With Specified Proof Load Values - Coarse Thread (ISO 898-2:1992,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 898-2:2012.

47. MS ISO 898-5:2003/td> Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasterners Not Under Tensile Stresses (ISO 898-5:1998,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 898-5:2012

48. MS ISO 898-7:2003 (CONFIRMED:2012) Mechanical Properties of Fasterners - Part 7 : Torsional Test and Minimum Torques for Bolts and Screws with Nominal Diameters 1 mm to 10 mm (ISO 898-7:1992,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 898-7:1992. The standard was last reviewed and confirmed in 2020.

49. MS ISO 965-1:2002 ISO General Purpose Metric Screw Threads - Tolerances - Part 1 : Principles and Basic Data (ISO 965-1:1998,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 965-1

50. MS ISO 965-2:2003 (CONFIRMED:2012) ISO General Purpose Metric Screw Threads - Tolerances - Part 2: Limits of Sizes For General Purpose External and Internal Screw Threads - Medium Quality (ISO 965-2:1998,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 965-2

51. MS ISO 965-3:2003 (CONFIRMED:2012) ISO General Purpose Metric Screw Threads- Tolerances - Part 3: Deviations for Constructional Screw Threads (ISO 965-3:1998,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 965-3

52. MS ISO 965-4:2003 (CONFIRMED:2012) ISO General Purpose Metric Screw Threads - Tolerances - Part 4: Limits of Sizes for Hot-Dip Galvanized External Screw Threads to Mate with Internal Screw Threads Tapped with Tolerance Position H or G After Galvanizing (ISO 965-4:1998,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 965-4.

53. MS ISO 965-5:2003 (CONFIRMED:2012) ISO General Purpose Metric Screw Threads - Tolerances - Part 5: Limits of Sizes for Internal Screw Threads to Mate with Hot-Dip Galvanized External Screw Threads with Maximum Size of Tolerance Position H Before Galvanizing (ISO 965-5:1998,IDT) 11/08/2021 Withdraw without replacement as a result from Systematic Review on 25 May 2021.

TC recommended to direct use latest version of ISO 965-5

1 SEPTEMBER 2021 – 31 OCTOBER 2021
No. MS Number MS Title NSC Approval Date Justification for withdrawal
NSC Z – Environmental Management
1. MS 1545:2002 Rubber Hoses for Agricultural Spraying (ISO 1401:1999, MOD) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
2. MS ISO 1825:2012 Rubber Hoses and Hose Assemblies for Aircraft Ground Fuelling And Defuelling - Specification (ISO 1825:2010, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
3. MS ISO 2929:2007 Rubber Hoses and Hose Assemblies for Bulk Fuel Delivery By Truck - Specification (ISO 2929:2002,IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
4. MS ISO 3861:2007 Rubber Hoses for Sand and Grid Blasting - Specification (ISO 3861:2005, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
5. MS ISO 3862:2010 Rubber Hoses and Hose Assemblies - Rubber Covered Spiral-Wire Reinforced Hydraulic Types for Oil-Based Or Water-Based Fluids - Specification (FIRST REVISION) (ISO 3862:2009,IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
6. MS ISO 3994:2008 Thermoplastics Hoses - Helical-Thermoplastic-Reinforced Thermoplastics Hoses for Suction and Discharge Of Aqueous Materials - Specification (ISO 3994:2007, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
7. MS ISO 4080:2011 Rubber and Plastics Hoses and Hose Assemblies - Determination of Permeability to Gas (First Revision) (ISO 4080:2009, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs
8. MS ISO 4671:2007 Rubber and Plastics Hoses and Hose Assemblies-Methods of Measurement of Dimensions (ISO 4671:1999, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
9. MS ISO 4672:2008 Rubber and Plastics Hoses-Sub-Ambient Temperature Flexibility Tests (ISO 4672:1997, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
10. MS ISO 5774:2007 (confirmed 2013) Thermoplastics Hoses - Textile-Reinforced Types for Compressed-Air Applications - Specification (ISO 5774:2006, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
11. MS ISO 6807:2007 Rubber Hoses and Hose Assemblies for Rotary Drilling And Vibration Applications - Specification (ISO 6807:2003, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
12. MS ISO 7233:2008 (Confirmed 2013) Rubber and Thermoplastics Hoses And Hose Assemblies - Determination of Resistance to Vacuum (ISO 7233:2006, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
13. MS ISO 7326:2007 Rubber and Plastics Hoses-Assessment of Ozone Resistance Under Static Conditions (ISO 7326:2006, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
14. MS ISO 8029:2008 Thermoplastics Hose - General-Purpose Collapsible Water Hose, Textile-Reinforced - Specification (ISO 8029:2007, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
15. MS ISO 8330:2008 Rubber and Plastic Hoses And Hose Assemblies - Vocabulary (First Revision) (ISO 8330:2007,IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
16. MS ISO 8033:2008 Rubber and Plastics Hose-Determination Of Adhesion Between Components (ISO 8033:2006, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.
17. MS ISO 11758:2008 Rubber and Plastics Hoses-Exposure to A Xenon Arc Lamp-Determination Of Changes In Colour And Appearance (ISO 11758:1995, IDT) 30/3/2021 i. The MS are more than 5 years old
ii. The decision was discussed during NSC N/ TC 2 No.1/2020 meeting / SR workshop on 25 August 2020. The meeting agreed to withdraw (WWO) previous MS and direct use latest ISO due to ensure the standard up to date and less industry needs.