Standards

Relevant standards related to COVID-19 pandemic

In response to the COVID-19 situation, Department of Standards Malaysia is providing free viewing access to standards that can be related to providing guidance in management of the pandemic. These standards are selected based on comparison done with our counterparts from all over the world and with the international standards organisation such as ISO and IEC. The standards might be useful for users to address issues or as proactive measures in managing the effect of the pandemic. These free viewing access is limited to Malaysian Standards only.

MS FREE VIEW ACCESS FOR COVID-19
No Category MS Code MS Title Preview
1. CLEANING MS 2550:2014 CLEANING PERFORMANCE - COMMERCIAL AND PUBLIC BUILDINGS Click here
2. CLEANING MS 2550:2014, ERR.1: 2016 CLEANING PERFORMANCE - COMMERCIAL AND PUBLIC BUILDINGS ERRATA 1 Click here
3. CLEANING MS 1285:2014 GLASS CLEANER - SPECIFICATION (SECOND REVISION) Click here
4. FACE MASK MS ISO 22609:2011 (CONFIRMED:2015) CLOTHING FOR PROTECTION AGAINST INFECTIOUS AGENTS - MEDICAL FACE MASKS - TEST METHOD FOR RESISTANCE AGAINST PENETRATION BY SYNTHETIC BLOOD (FIXED VOLUME, HORIZONTALLY PROJECTED) (ISO 22609:2004, IDT) Click here
5. FOOD MS 1514:2009 GOOD MANUFACTURING PRACTICE (GMP) FOR FOOD (FIRST REVISION) Click here
6. FOOD MS 1514:2012 (BM) AMALAN PENGILANGAN YANG BAIK (GMP) BAGI MAKANAN (SEMAKAN PERTAMA) Click here
7. FOOD HYGINE MS 1480:2019 FOOD SAFETY ACCORDING TO HAZARD ANALYSIS AND CRITICAL CONTROL POINT (HACCP) SYSTEM (SECOND REVISION) Click here
8. LABORATORY MANAGEMENT SYSTEMS AND MEDICAL DEVICES MS ISO 15189:2014 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (SECOND REVISION) (ISO 15189:2012, IDT) Click here
9. LABORATORY MANAGEMENT SYSTEMS AND MEDICAL DEVICES MS ISO 14971:2009 (CONFIRMED:2015) MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (FIRST REVISION) (ISO 14971:2007, IDT) Click here
10. LABORATORY MANAGEMENT SYSTEMS AND MEDICAL DEVICES MS ISO 10993-1:2011 (CONFIRMED:2015) BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (FIRST REVISION) (ISO 10993-1:2009, COR. 1:2010, IDT) Click here
11. MEDICAL DEVICES / RESPIRATORY EQUIPMENT MS ISO 13485:2017 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (FIRST REVISION) (ISO 13485:2016, IDT) Click here
12. MEDICAL GLOVE MS 1549 : 2002 TEST METHOD FOR DETERMINATION OF RESIDUAL POWDER ON POWDER -FREE RUBBER MEDICAL GLOVES Click here
13. MEDICAL GLOVE MS 1550 : 2002 TEST METHOD FOR DETERMINATION OF RESIDUAL POWDER ON POWDERED RUBBER MEDICAL GLOVES Click here
14. MEDICAL GLOVE MS 2299-1:2010 (CONFIRMED:2015) MEDICAL GLOVES FOR SINGLE USE - PART 1: REQUIREMENTS AND TESTING FOR FREEDOM FROM HOLES Click here
15. MEDICAL GLOVE MS 2299-3:2010 MEDICAL GLOVES FOR SINGLE USE - PART 3: REQUIREMENTS AND TESTING FOR BIOLOGICAL EVALUATION Click here
16. RISK MANAGEMENT MS ISO 31000:2010 RISK MANAGEMENT - PRINCIPLES AND GUIDELINES (ISO 31000:2009, IDT)

Click here

17. STERILISATION MS ISO 17665-1:2010 (CONFIRMED:2015) STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 17665-1:2006, IDT) Click here
18. STERILISATION MS 2364-2:2010 (CONFIRMED:2015) STERILISATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF MS ISO 17665-1 Click here
19. STERILISATION MS ISO 11137-3:2011 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS (ISO 11137-3:2006, IDT) Click here
20. STERILISATION MS ISO 11137-1:2010 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, IDT) Click here
21. STERILISATION MS ISO 11138-1:2010 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11138-1:2006, IDT) Click here
22. STERILISATION MS ISO 11138-2:2010 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 2: BIOLOGICAL INDICATORS FOR ETHYLENE OXIDE STERILIZATION PROCESSES (ISO 11138-2:2006, IDT) Click here
23. STERILISATION MS ISO 11138-3:2010 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 3: BIOLOGICAL INDICATORS FOR MOIST HEAT STERILIZATION PROCESSES (ISO 11138-3:2006, IDT) Click here
24. STERILISATION MS ISO 11138-4:2010 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 4: BIOLOGICAL INDICATORS FOR DRY HEAT STERILIZATION PROCESSES (ISO 11138-4:2006, IDT) Click here
25. STERILISATION MS ISO 11138-5:2010 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 5: BIOLOGICAL INDICATORS FOR LOW-TEMPERATURE STEAM AND FORMALDEHYDE STERILIZATION PROCESSES (ISO 11138-5:2006, IDT) Click here
26. STERILISATION MS ISO 11140-5:2010 (CONFIRMED:2015) STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS (ISO 11140-5:2007, IDT) Click here
27. VENTILATORS MS ISO 10651-3:2006 (CONFIRMED:2013) LUNG VENTILATORS FOR MEDICAL USE - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS (ISO 10651-3:1997, IDT) Click here
28. VENTILATORS MS ISO 10651-4:2006 (CONFIRMED:2013) LUNG VENTILATORS - PART 4: PARTICULAR REQUIREMENTS FOR OPERATORPOWERED RESUSCITATORS (ISO 10651-4:2002, IDT) Click here
29. VENTILATORS MS ISO 10651-5:2010 (CONFIRMED:2015) LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS (ISO 10651-5:2006, IDT) Click here
30. VENTILATORS MS IEC 60601-2-12:2007 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS (IEC 60601-2-12:2001, IDT) Click here

ISO is also providing free viewing access for standards related to COVID-19.  The relavant standards can be accessed trough the following link : Click here