| No. | NSC | MS Number | MS Title | NSC Approval Date of Confirmation |
|---|---|---|---|---|
| 1 | NSC 05 | MS 1114:2017 | General requirements for electrical accessories (Second revision) | 26/1/2023 |
| 2 | NSC 05 | MS IEC 60998-2-4:2005 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices | 26/1/2023 |
| 3 | NSC 05 | MS IEC 60998-2-3:2005 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices separate entities with insulation-piercing clamping units | 26/1/2023 |
| 4 | NSC 05 | MS IEC 60998-2-2:2005 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units | 26/1/2023 |
| 5 | NSC 05 |
MS IEC 60998-1:2005 (Confirmed: 2015) |
Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements (IEC 60998-1:2002, IDT) | 26/1/2023 |
| 6 | NSC 05 | MS IEC 60998-2-1:2005 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units | 26/1/2023 |
| 7 | NSC 19 | MS 1597-2-7:2017 | Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines (Fourth revision) (IEC 60335-2-7:2012, MOD) | 1/3/2023 |
| 8 | NSC 19 | MS IEC 60335-2-4:2017 | Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors (Third revision) (IEC 60335-2-4:2012, IDT) | 1/3/2023 |
| 9 | NSC 19 | MS IEC 60335-2-98:2014 | Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers (First revision) (IEC 60335-2-98:2008, IDT) | 1/3/2023 |
| 10 | NSC 19 | MS IEC 60335-2-11:2014 | Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (Second revision) (IEC 60335-2-11:2012, IDT) | 1/3/2023 |
| 11 | NSC 19 | MS IEC 60335-2-51:2003 | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51:2002, IDT) | 1/3/2023 |
| 12 | NSC 25 | MS ISO/IEC 17065:2017 | Conformity assessment - Requirements for bodies certifying products, processes and services (First revision) (ISO/IEC 17065:2012, IDT) | 7/3/2023 |
| 13 | NSC 25 | MS ISO/IEC 17050-2:2004 | Conformity assessment - Supplier's declaration of conformity - Part 2: Supporting documentation (ISO/IEC 17050-2:2004, IDT) | 7/3/2023 |
| 14 | NSC 25 | MS ISO/IEC 17050-1:2004 | Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, IDT) (Published by DSM in 2006) | 7/3/2023 |
| 15 | NSC 25 | MS ISO/IEC 17021-1:2017 | Conformity assessment - Requirements for bodies providing audits and certification of management systems - Part 1: Requirements (Second revision) (ISO/IEC 17021-1:2015, IDT) | 7/3/2023 |
| 16 | NSC 05 |
MS 2107:2007 (Confirmed: 2014) |
Electric cable and wire: 600/1 000 (Um = 1200) V multi core XLPE insulated cable - Armoured | 9/3/2023 |
| 17 | NSC 05 |
MS 2106:2007 (Confirmed: 2014) |
Electric cable and wire: 600/1 000 (Um = 1200) V multi core XLPE insulated cable - Non-armoured | 9/3/2023 |
| 18 | NSC 05 |
MS 2105:2007 (Confirmed: 2014) |
Electric cable and wire: 600/1 000 (Um = 1200) V single core XLPE insulated cable - Armoured | 9/3/2023 |
| 19 | NSC 05 |
MS 2104:2007 (Confirmed: 2014) |
Electric cable and wire: 600/1 000 (Um = 1200) V single core XLPE insulated cable - Non-armoured | 9/3/2023 |
| 20 | NSC 05 |
MS 2103:2007 (Confirmed:2014) |
Electric cable and wire: 600/1 000 (Um = 1200) V multi core PVC insulated cable - Armoured | 9/3/2023 |
| 21 | NSC 05 |
MS 2102:2007 (Confirmed: 2014) |
Electric cable and wire: 600/1 000 (Um = 1200) V multi core PVC insulated cable - Non-armoured | 9/3/2023 |
| 22 | NSC 05 |
MS 2101:2007 (Confirmed: 2014) |
Electric cable and wire: 600/1 000 (Um = 1200) V single core PVC insulated cable - Armoured | 9/3/2023 |
| 23 | NSC 05 |
MS 2100:2007 (Confirmed:2014) |
Electric cable and wire: 600/1 000 (Um = 1200) V single core PVC insulated cable - Non-armoured | 9/3/2023 |
| 24 | NSC 11 | MS 409:2012 | Packaging and storage of pesticides - Code of Practice | 17/5/2023 |
| 25 | NSC 11 | MS 957:1985 | Specification for Jute Bags | 17/5/2023 |
| 26 | NSC 26 | MS ISO 10155:2011 | Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications (ISO 10155:1995, Cor. 1:2002, IDT) | 26/6/2023 |
| 27 | NSC 26 | MS ISO 10396:2011 | Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems (ISO 10396:2007, IDT) | 26/6/2023 |
| 28 | NSC 26 | MS ISO 10498:2007 | Ambient air - Determination of sulfur dioxide - Ultraviolet fluorescence method | 26/6/2023 |
| 29 | NSC 26 | MS ISO 11222:2009 | Air quality - Determination of the uncertainty of the time average of air quality measurements | 26/6/2023 |
| 30 | NSC 26 | MS ISO 11338-1:2011 | Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling (ISO 11338-1:2003, IDT) | 26/6/2023 |
| 31 | NSC 26 | MS ISO 11338-2:2011 | Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination (ISO 11338-2:2003, IDT) | 26/6/2023 |
| 32 | NSC 26 | MS ISO 11564:2009 | Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method | 26/6/2023 |
| 33 | NSC 26 | MS ISO 11632:2009 | Stationary source emissions - Determination of mass concentration of sulfur dioxide - ion chromatography method | 26/6/2023 |
| 34 | NSC 26 | MS ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (Second revision) (ISO 14001:2015, IDT) | 26/6/2023 |
| 35 | NSC 26 | MS ISO 14004:2017 | Environmental management systems - General guidelines on implementation (Second revision) (ISO 14004:2016, IDT) | 26/6/2023 |
| 36 | NSC 26 | MS ISO 14025:2007 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006, IDT) | 26/6/2023 |
| 37 | NSC 26 | MS ISO 14034:2018 | Environmental management – Environmental technology verification (ETV) (ISO 14034:2016, IDT) | 26/6/2023 |
| 38 | NSC 26 | MS ISO 14040:2008 | Environmental management - Life cycle assessment - Principles and framework (First revision) (ISO 14040:2006, IDT) | 26/6/2023 |
| 39 | NSC 26 | MS ISO 14044:2008 | Environmental management - Life cycle assessment - Requirements and guidelines | 26/6/2023 |
| 40 | NSC 26 | MS ISO 14046:2017 | Environmental management – Water footprint – Principles, requirements and guidelines (ISO 14046:2014, IDT) | 26/6/2023 |
| 41 | NSC 26 | MS ISO 14164:2011 | Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - automated method (ISO 14164:1999, IDT) | 26/6/2023 |
| 42 | NSC 26 | MS ISO 14956:2010 | Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002, IDT) | 26/6/2023 |
| 43 | NSC 26 | MS ISO 15713:2009 | Stationary source emissions - Sampling and determination of gaseous fluoride content | 26/6/2023 |
| 44 | NSC 26 | MS ISO 16000-10:2008 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method | 26/6/2023 |
| 45 | NSC 26 | MS ISO 16000-12:2009 | Indoor air - Part 12: Sampling strategy for polychlorinated biphenyls (PCBS), polychlorinated dibenzo-p-dioxins (PCDDS), polychlorinated dibenzofurans (PCDFS) and polycyclic aromatic hydrocarbons (PAHS) | 26/6/2023 |
| 46 | NSC 26 | MS ISO 16000-13:2010 | Indoor air - Part 13: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBS) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDS/PCDFS) - collection on sorbent-backed filters | 26/6/2023 |
| 47 | NSC 26 | MS ISO 16000-14:2010 | Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBS) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDS/PCDFS) - extraction, clean-up and analysis by high-resolution gas chromatography | 26/6/2023 |
| 48 | NSC 26 | MS ISO 16000-15:2011 | Indoor air - Part 15: Sampling strategy for nitrogen dioxide (NO2) (ISO 16000-15:2008, IDT) | 26/6/2023 |
| 49 | NSC 26 | MS ISO 16000-16:2011 | Indoor air - Part 16: Detection and enumeration of moulds - Sampling by filtration (ISO 16000-16:2008, IDT) | 26/6/2023 |
| 50 | NSC 26 | MS ISO 16000-17:2011 | Indoor air - Part 17: Detection and enumeration of moulds - culture-based method (ISO 16000-17:2008, IDT) | 26/6/2023 |
| 51 | NSC 26 | MS ISO 16000-1:2008 | Indoor air - Part 1: General aspects of sampling strategy (ISO 16000-1:2004, IDT) | 26/6/2023 |
| 52 | NSC 26 | MS ISO 16000-2:2008 | Indoor air - Part 2: Sampling strategy for formaldehyde | 26/6/2023 |
| 53 | NSC 26 | MS ISO 16000-4:2015 | Indoor air - Part 4: Determination of formaldehyde - diffusive sampling method (First revision) (ISO 16000-4:2011, IDT) | 26/6/2023 |
| 54 | NSC 26 | MS ISO 16000-5:2008 | Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCS) | 26/6/2023 |
| 55 | NSC 26 | MS ISO 16000-7:2009 | Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations | 26/6/2023 |
| 56 | NSC 26 | MS ISO 16000-8:2008 | Indoor air - Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions | 26/6/2023 |
| 57 | NSC 26 | MS ISO 16017-1:2008 | Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling | 26/6/2023 |
| 58 | NSC 26 | MS ISO 16017-2:2008 | Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling | 26/6/2023 |
| 59 | NSC 26 | MS ISO 16362:2007 | Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography (ISO 16362:2005, IDT) | 26/6/2023 |
| 60 | NSC 26 | MS ISO 16622:2007 | Meteorology - Sonic anemometers/thermometers - Acceptance test methods for mean wind measurements | 26/6/2023 |
| 61 | NSC 26 | MS ISO 7168-1:2010 | Air quality - Exchange of data - Part 1: General data format (ISO 7168-1:1999, IDT) | 26/6/2023 |
| 62 | NSC 26 | MS ISO 7168-2:2010 | Air quality - Exchange of data - Part 2: Condensed data format (ISO 7168-2:1999, IDT) | 26/6/2023 |
| 63 | NSC 26 | MS ISO 7934:2010 | Stationary source emissions - Determination of the mass concentration of sulfur dioxide - hydrogen peroxide/barium perchlorate/thorin method (ISO 7934:1989, Amd. 1:1998, IDT) | 26/6/2023 |
| 64 | NSC 26 | MS ISO 8756:2008 | Air quality - Handling of temperature, pressure and humidity data (ISO 8756:1994, IDT) | 26/6/2023 |
| 65 | NSC 26 | MS ISO 9169:2008 | Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006, IDT) | 26/6/2023 |
| 66 | NSC 26 | MS ISO 9359:2009 | Air quality - Stratified sampling method for assessment of ambient air quality (ISO 9359:1989, IDT) | 26/6/2023 |
| 67 | NSC 21 | MS ISO 5554:2012 | Meat and meat products-Determination of starch content-reference method (ISO 5554:1978, IDT) | 4/7/2023 |
| 68 | NSC 21 | MS ISO 3657:2009 | Animal and vegetables fats and oils-Determination of saponification value (ISO 3657:2002, IDT) | 4/7/2023 |
| 69 | NSC 14 | MS ISO 1403:2007 | Rubber hoses, textile-reinforced, for general-purpose water applications-Specifications (ISO 1403:2005) | 5/7/2023 |
| 70 | NSC 02 | MS ISO 5626:1999 | Paper - Determination of folding endurance | 11/7/2023 |
| 71 | NSC 02 | MS ISO 692:2002 | Pulps - Determination of alkali solubility (ISO 692:1982, IDT) | 11/7/2023 |
| 72 | NSC 02 | MS ISO 186:2003 | Paper and board - Sampling to determine average quality (ISO 186:2002, IDT) | 11/7/2023 |
| 73 | NSC 02 | MS ISO 8787:2003 | Paper and board - Determination of capillary rise - Klemm method (First revision) (ISO 8787:1986, IDT) | 11/7/2023 |
| 74 | NSC 02 | MS ISO 14487:2010 | Pulps - Standard water for physical testing (ISO 14487:1997, IDT) | 11/7/2023 |
| 75 | NSC 02 | MS ISO 15754:2010 | Paper and board - Determination of Z-directional tensile strength (ISO 15754:2009, IDT) | 11/7/2023 |
| 76 | NSC 02 | MS ISO 2471:2010 | Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method (First revision) (ISO 2471:2008, IDT) | 11/7/2023 |
| 77 | NSC 02 | MS ISO 3689:2010 | Paper and board - Determination of bursting strength after immersion in water (ISO 3689:1983, IDT) | 11/7/2023 |
| 78 | NSC 02 | MS ISO 5269-2:2010 | Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Kothen method (ISO 5269-2:2004, IDT) | 11/7/2023 |
| 79 | NSC 02 | MS ISO 5269-3:2010 | Pulps - Preparation of laboratory sheets for physical testing - Part 3: Conventional and rapid-kothen sheet formers using a closed water system (ISO 5269-3:2008, IDT) | 11/7/2023 |
| 80 | NSC 02 | MS ISO 5627:2010 | Paper and board - Determination of smoothness (BEKK method) (ISO 5627:1995, Cor. 1:2002, IDT) | 11/7/2023 |
| 81 | NSC 02 | MS ISO 5630-6:2010 | Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (Nitrogen dioxide) (ISO 5630-6:2009, IDT) | 11/7/2023 |
| 82 | NSC 02 | MS ISO 12192:2012 | Paper and board - Determination of compressive strength - Ring crush method (First revision) (ISO 12192:2011, IDT) | 11/7/2023 |
| 83 | NSC 02 | MS ISO 15320:2012 | Pulp, paper and board — Determination of Pentachlorophenol in an aqueous extract (ISO 15320:2011, IDT) | 11/7/2023 |
| 84 | NSC 02 | MS ISO 2493-1:2012 | Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection (Second revision) (ISO 2493-1:2010, IDT) | 11/7/2023 |
| 85 | NSC 02 | MS ISO 3034:2012 | Corrugated fibreboard - Determination of single sheet thickness (First revision) (ISO 3034:2011, IDT) | 11/7/2023 |
| 86 | NSC 02 | MS ISO 5351:2012 | Pulps- Determination of limitimg viscosity number in cupri-ethylenediamine(CED) solution (ISO 5351:2010, IDT) | 11/7/2023 |
| 87 | NSC 02 | MS ISO 11093-1:2007 | Paper and board - Testing of cores - Part 1: Sampling (ISO 11093-1:1994, IDT) | 11/7/2023 |
| 88 | NSC 02 | MS ISO 11093-2:2007 | Paper and board - Testing of cores - Part 2: Conditioning of test samples (ISO 11093-2:1994, IDT) | 11/7/2023 |
| 89 | NSC 02 | MS ISO 11093-3:2008 | Paper and board - Testing of cores - Part 3: Determination of moisture content using the oven drying method (ISO 11093-3:1994, IDT) | 11/7/2023 |
| 90 | NSC 02 | MS ISO 13542:2007 | Paper and board - Specification for internal diameters of cores for reels (ISO 13542:2006, IDT) | 11/7/2023 |
| 91 | NSC 02 | MS ISO 17812:2008 | Paper, board and pulps - Determination of total magnesium, total calcium, total manganese, total iron and total copper (ISO 17812:2007, IDT) | 11/7/2023 |
| 92 | NSC 02 | MS ISO 1924-3:2008 | Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min) (ISO 1924-3:2005, IDT) | 11/7/2023 |
| 93 | NSC 02 | MS ISO 216:2008 | Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007, IDT) | 11/7/2023 |
| 94 | NSC 02 | MS ISO 22754:2009 | Pulp and paper - Determination of the effective residual ink concentration (Eric number) by infrared reflectance measurement (ISO 22754:2008, IDT) | 11/7/2023 |
| 95 | NSC 02 | MS ISO 2470-2:2009 | Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 2: Outdoor daylight conditions (D65 brightness) (ISO 2470-2:2008, IDT) | 11/7/2023 |
| 96 | NSC 02 | MS ISO 3036:2009 | Board - Determination of puncture resistance (ISO 3036:1975, IDT) | 11/7/2023 |
| 97 | NSC 02 | MS ISO 4119:2007 | Pulps - Determination of stock concentration (ISO 4119:1995, IDT) | 11/7/2023 |
| 98 | NSC 02 | MS ISO 5267-1:2008, AMD.1:2010 | Pulps - Determination of drainability - Part 1: Schopper-riegler method (ISO 5267-1:1999, IDT) | 11/7/2023 |
| 99 | NSC 02 | MS ISO 5267-2:2007 | Pulps - Determination of drainability - Part 2: "Canadian standard" freeness method (ISO 5267-2:2001, IDT) | 11/7/2023 |
| 100 | NSC 02 | MS ISO 8254-1:2009 | Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, tappi method (ISO 8254-1:2009, IDT) | 11/7/2023 |
| 101 | NSC 02 | MS ISO 302:2018 | Pulps - Determination of kappa number (ISO 302:2015, IDT) | 31/7/2023 |
| 102 | NSC 02 | MS 2362:2010 | Recovered paper - Grade description and moisture inspection procedures | 31/7/2023 |
| 103 | NSC 02 | MS ISO 1924-2:2010 | Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (First revision) (ISO 1924-2:2008, IDT) | 31/7/2023 |
| 104 | NSC 02 | MS 18:2010 | Toilet tissue paper – Specification (First revision) | 31/7/2023 |
| 105 | NSC 02 | MS ISO 776:2012 | Pulps - Determination of acid-insoluble ash (First revision) (ISO 776:2011, IDT) | 31/7/2023 |
| 106 | NSC 02 | MS ISO 11093-6:2008 | Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005, IDT) | 31/7/2023 |
| 107 | NSC 02 | MS ISO 5269-1:2007 | Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005, IDT) | 31/7/2023 |
| 108 | NSC 25 | MS ISO 10725:2004 | Acceptance sampling plans and procedures for the inspection of bulk materials | 31/7/2023 |
| 109 | NSC 25 | MS ISO 11095:2001 | Linear calibration using reference materials | 31/7/2023 |
| 110 | NSC 25 | MS ISO 11453:2002 | Statistical interpretation of data - Tests and confidence intervals relating to proportions | 31/7/2023 |
| 111 | NSC 25 | MS ISO 11648-2:2004 | Statistical aspects of sampling from bulk materials - Part 2: Sampling of particulate materials | 31/7/2023 |
| 112 | NSC 25 | MS ISO 11843-1:2001 | Capability of detection - Part 1: Terms and definitions | 31/7/2023 |
| 113 | NSC 25 | MS ISO 11843-2:2002 | Capability of detection - Part 2: Methodology in the linear calibration case | 31/7/2023 |
| 114 | NSC 25 | MS ISO 11843-3:2004 | Capability of detection - Part 3: Methodology for the determination of the critical value for the response variable when no calibration data are used | 31/7/2023 |
| 115 | NSC 25 | MS ISO 11843-4:2005 | Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value | 31/7/2023 |
| 116 | NSC 25 | MS ISO 16269-4:2010 | Statistical interpretation of data - Part 4: Detection and treatment of outliers (ISO 16269-4:2010, IDT) | 31/7/2023 |
| 117 | NSC 25 | MS ISO 2602:1994 | Statistical interpretation of test results - Estimation of the mean - Confidence interval | 31/7/2023 |
| 118 | NSC 25 | MS ISO 2854:1994 | Statistical interpretation of data - Techniques of estimation and tests relating to means and variances | 31/7/2023 |
| 119 | NSC 25 | MS ISO 2859-1:2001 | Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection | 31/7/2023 |
| 120 | NSC 25 | MS ISO 2859-3:2018 | Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (First revision) (ISO 2859-3:2005, IDT) | 31/7/2023 |
| 121 | NSC 25 | MS ISO 3301:1994 | Statistical interpretation of data - Comparison of two means in the case of paired observations | 31/7/2023 |
| 122 | NSC 25 | MS ISO 3494:1994 | Statistical interpretation of data - Power of tests relating of means and variances | 31/7/2023 |
| 123 | NSC 25 | MS ISO 3534-1:2006 | Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability (First revision) (SO 3534-1:2006, IDT) | 31/7/2023 |
| 124 | NSC 25 | MS ISO 5479:2001 | Statistical interpretation of data - Tests for departure from the normal distribution | 31/7/2023 |
| 125 | NSC 25 | MS ISO 5725-6:2002 | Accuracy (Trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values | 31/7/2023 |
| 126 | NSC 12 | MS ISO 612:2005 | Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms and definitions (ISO 612-1978, IDT) | 10/8/2023 |
| 127 | NSC 12 | MS 1885:2005 | Road vehicles - Passenger cars - Arrangement of foot controls | 10/8/2023 |
| 128 | NSC 12 | MS ISO 3958:2005 | Passenger cars - Driver hand-control reach (ISO 3958:1996, IDT) | 10/8/2023 |
| 129 | NSC 12 | MS ISO 4100:1999 | Road vehicles - World parts manufacturer identifier (WPMI) code (ISO 4100:1980, IDT) | 10/8/2023 |
| 130 | NSC 12 | MS 1743:2004 | Road vehicles - Guidelines for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicle identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes | 10/8/2023 |
| 131 | NSC 12 | MS 1744:2004 | Road vehicles - Vehicles identification number (VIN) - location and attachment (ISO 4030:1983, MOD) | 10/8/2023 |
| 132 | NSC 12 | MS 1154:2003 | Specification for webbing for car seat belts (First revision) | 10/8/2023 |
| 133 | NSC 12 | MS 1175:2003 | Specification for seat belts for motor vehicles (Second revision) | 10/8/2023 |
| 134 | NSC 12 | MS 75:2002 | Specification for anchorages for seat belts (First revision) | 10/8/2023 |
| 135 | NSC 12 | MS ISO 6813:2008 | Road vehicles - Collision classification - Terminology (ISO 6813:1998, IDT) | 10/8/2023 |
| 136 | NSC 12 | MS ISO 6487:2017 | Road vehicles – Measurement technique in impact test – instrumentation (First revision) | 10/8/2023 |
| 137 | NSC 23 | MS ISO 11064-6:2007 | Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005, IDT) |
10/11/2023 |
| 138 | NSC 23 | MS ISO 15536-1:2007 | Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO15536-1:2005, IDT) | 10/11/2023 |
| 139 | NSC 23 | MS ISO 15536- 2:2007 | Ergonomics - Computer manikins and body templates - Part 2: verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007, IDT) | 10/11/2023 |
| 140 | NSC 23 | MS ISO 15743:2010 | Ergonomics of the thermal environment-Cold workplaces -Risk assessment and management (ISO 15743:2008, IDT) | 10/11/2023 |
| 141 | NSC 23 | MS ISO 24500:2012 | Ergonomics - Accessible design - Auditory signals for consumer products (ISO 24500:2010, IDT) | 10/11/2023 |
| 142 | NSC 23 | MS ISO 7731:2007 | Ergonomics - Danger signals for public and work areas – Auditory danger signals (ISO 7731:2003, IDT) | 10/11/2023 |
| 143 | NSC 23 | MS ISO 9241-1:2005 | Ergonomic requirements for office work with visual display terminals (VDTS) - Part 1: General introduction (ISO 9241-1:1997 and its amendment 1:2001, IDT) | 10/11/2023 |
| 144 | NSC 23 | MS ISO 9241- 300:2010 |
Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements (ISO 9241-300:2008, IDT) | 10/11/2023 |
| 145 | NSC 23 | MS ISO 9241- 304:2010 | Ergonomics of human-system interaction - Part 304: User performance test methods for electronic visual displays (ISO 9241-304:2008, IDT) | 10/11/2023 |
| 146 | NSC 23 | MS ISO 9241-400:2007 | Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices (ISO 9241- 400:2007, IDT) | 10/11/2023 |
| 147 | NSC 23 | MS ISO 9886:2007 | Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 9886:2004, IDT) | 10/11/2023 |
| 148 | NSC 23 | MS ISO 9921:2007 | Ergonomics - Assessment of speech communication (ISO 9921:2003, IDT) | 10/11/2023 |
| 149 | NSC 11 | MS 485 : Part 4 : 1976 | Glossary of Packaging Terms Part 4 : Paper and Board Packaging | 13/12/2023 |
| 150 | NSC 11 | MS 1425 : Part 2 : 1997 | Glossary of Terms for Packaging Part 2 : Plastics and Flexible Packaging | 13/12/2023 |
| 151 | NSC 11 | MS 1425 : Part 3 : 1997 | Glossary of Terms for Packaging : Part 3 : Plastic Sacks | 13/12/2023 |
| 152 | NSC 11 | MS 1814 : Part 1 : 2005 | Transport Packaging – Reusable, Rigid Plastics Distribution Boxes – Part 1 : General Purpose Application | 13/12/2023 |
| 153 | NSC 11 | MS 1818 : Part 2 : 2005 | Transport Packaging – Reusable, Rigid Plastics Distribution Boxes – Part 2 : General Specification for Testing | 13/12/2023 |
| 154 | NSC 07 | MS ISO 14814:2007 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Reference architecture and terminology (ISO 14814:2005, IDT) | 29/12/2023 |
| No. | Total |
|---|---|
| NSC 02 | 38 |
| NSC 05 | 14 |
| NSC 07 | 1 |
| NSC 11 | 7 |
| NSC 12 | 11 |
| NSC 14 | 1 |
| NSC 19 | 5 |
| NSC 21 | 2 |
| NSC 23 | 12 |
| NSC 25 | 22 |
| NSC 26 | 41 |
| TOTAL | 154 |